 |
Cores of flush kalamein doors are solid, kiln dried,
white
pine, milled cores, mortised and tennoned, and covered with
not less than 26 gauge sheet steel |
|
Kalamein panel doors have wood stiles and rails, covered
with not less than 26 gauge sheet steel, which are then
drawn through steel dies to insure tightiness to the cores. |
|
Kalamein panels are composed of 3/8" sheetrock cores,
covered with not less than 26 gauge sheet steel on both
sides and glued under pressure. |
|
Steel panel molding are then nailed in place to meet
labeling
requirement for panel doors. |
|
Doors can also be made flush/panel for vandal resistance. |
|
All doors are glued under pressure to avoid warping. |
|
All doors can be made seamless where specified. |
|
Doors can be reinforced and mortised for various lock
sets. |
|
All exposed surfaces are cleaned of impurities and finished
with one coat of metallic primer. |
-- 